X-608 Infinity Micro

888813154260455644730

X-608 Infinity Micro – small level Infinity-Mirror.

An infinity mirror in the front illuminated by RGB LEDs, an RGB LED strip in the power supply tunnel and the standard 120mm RGB fan make the X-608 a real eye-catcher. The front made of tempered glass and the side panel made of 4mm thick tempered glass, which opens like a door, give a generous view of strong effects and colors, which are provided by switches on the front or via the 5V RGB header connector (addressable RGB LEDs). Plenty of room for additional fans or water cooling can be found in the spacious interior of the X-608.

On the top of the case are a removable dust filter and the controls. In addition to the HD audio sockets, there is a USB 3.0 Type A and USB 3.0 Type C connection as well as two separate switches for controlling the brightness and the effects. A dust filter in the power supply tunnel and silent blocks, on which the power supply is stored, allow a quiet and clean operation. The X-608 leaves nothing to be desired with a removable hard disk mounting frame, a holder for long graphics cards, the included RGB sync cable and a wide range of cable laying options.

  • Front panel made of tempered glass with RGB Infinity-Mirror
  • Window side panel made of 4mm thick tempered glass with door hinge
  • 120mm RGB fan and RGB LED-strip included
  • 3pin RGB header connector for 5V RGB motherboard control
RGB lighting

RGB lighting

In addition to the RGB Infinity-Mirror front panel, the X-608 impresses with its integrated 120mm RGB fan on the back and the integrated RGB LED strip over the power supply tunnel.

Controls

Controls

In addition to the easy-to-remove magnetic dust filter, the top contains both the buttons for manual adjustment of the RGB effects and the brightness, as well as a USB 3.0 Type A and a USB 3.0 Type C connection.

Tempered glass side panel

Tempered glass side panel

The 4mm thick tempered glass side panel can be safely and easily opened by the two integrated, hinged door hinges and then removed.

RGB/PWM board

RGB/PWM board

The integrated RGB/PWM board allows up to five RGB devices to be synchronized with each other and connected to the 3pin 5V RGB mainboard connection. In addition, the RGB/PWM board provides space for up to five 3pin fans, which can be speed-controlled via PWM.

  • x-608 homepage
    x-608 front
    x-608 front right
    x-608 rear
    x-608 side open
    x-608 side closed
    x-608 mb tray open
    x-608 rear open
    a x-608 dustfilter
    b x-608 hdd trays
    c x-608 gpu holder
    d x-608 door
    e x-608 rgb platine
    f x-608 psu mount
    g x-608 hdd tray
    h x-608 hdd tray m 25hdd
    i x-608 hdd tray m 35hdd
    j x-608 acc rgb-cable
    k x-
  • Size
    Form factor μATX, ITX
    Dimensions (h/w/d) 415 x 195 x 405mm
    Installation Dimensions
    Height CPU cooler (max.) 150mm
    Length graphics card (max.) 320mm
    Drive Bays
    5.25" external
    3.5" external
    3.5" internal 2x¹
    2.5" internal 5x¹
    Front connectors
    USB 3.0 1x
    USB 3.0 Type C 1x
    USB 2.0
    Microphone 1x
    Headphones 1x
    Power supply
    ATX-PSU
    Fan mounting option
    Front 3x 120mm (optional)
    Rear 1x 120mm (serial, RGB, 3pin connector)
    Top 2x 120mm (optional)
    Guarantee / Warranty
    Warranty 24 months
    Scope of delivery & Features
    Scope of delivery

    Case

    Retail packaging

    Screw set

    RGB sync cable

    Graphics cards bracket

    Manual (German)

    Features

    Front panel with Infinity-Mirror-Effect made of tempered glass

    Window side panel made of 4mm thick tempered glass

    Window side part swiveling for easy disassembly

    Integrated RGB LED-Strip on the PSU tunnel

    1x 120mm serial RGB fan at the rear installed

    Switch for manual brightness adjustment of the RGB LEDs

    RGB-/PWM-board for up to 5 RGB-devices
    (in combination with mainboard with PWM function up to 5 fans with 3pin-connector)

    3pin RGB header connector for 5V RGB motherboard control

    Two 3.5" mounting options underneath the mainboard tray with separated airflow

    Option to mount liquid coolers in 120mm and 240mm

    Easy removable dust filters in the cap and the bottom

    Decoupled PSU mounting in separated tunnel at the bottom

    Reusable slot brackets

    Cable management

    USB Type C internally as USB 3.0 connector

    Stands

    Logistical data
    Shipping Unit 1 Pcs
    EU palett 24 Pcs
    Weight net = 5.84kgs
    gross = 6.84kgs
    Item number 88881315
    EAN-Code 4260455644730
    ¹ can vary by using several mounting options
  •   No further information is available for this product.

  •   No special accessories are available for this product.

Contact

  • Our office hoursMO - TH  8:30 AM - 5:30 PMFR  8:30 AM - 3:00 PM
  • +49 (0) 511 726678-30
  • +49 (0) 511 726678-37
  • vertrieb@inter-tech.de

Copyright © 2019 Inter-Tech GmbH. All rights reserved. Designed by R. Lautenschläger
Copyright © 2019 Inter-Tech GmbH. All rights reserved. Designed by R. Lautenschläger
Copyright © 2019 Inter-Tech GmbH. All rights reserved. Designed by R. Lautenschläger

 

The products marked with ® are registered trademarks of their respective companies. The products marked with ™ are trademarks of their respective companies.

The products marked with ® are registered trademarks of their respective companies. The products marked with ™ are trademarks of their respective companies.