Q2 Illuminator blue888812664260455640435
Q2 Illuminator blue – The gaming case with lots of features for a small purse!
The Q2 Illuminator blue convinces due to its spacious and robust design and has a variety of features. The PSU can be mounted at the bottom of the case and is protected by removable dust filters. The three serial 120mm fans with blue LEDs behind the translucent front panel, in the rear of the case and in the cap ensure an optimal cooling of your components. Additional fans can be mounted in the front, on the top and in the window side panel.
Another highlight besides the well-thought-out cooling concept of the Q2 Illuminator blue is the easy and quick installation of all components. Serial guide screws ensure an easy mounting of the internal 3.5" HDDs. Two separated mounting options of 2.5" HDDs complete the variety of the case. Due to the combination of intelligent cable management and space for extension cards with a length of up to 38cm, the Q2 Illuminator blue becomes a space wonder.
The two USB 3.0- and USB 2.0- connectors along with the serial 2in1 Card Reader (MicroSD and SD) on the top of the case offer a fast and easy handling and complete the package.
Size Form factor ATX, μATX Dimensions (h/w/d) 490 x 210 x 465mm Installation Dimensions Height CPU cooler (max.) 150mm Length graphics card (max.) 380mm Drive Bays 5.25" external 1x 3.5" external 3.5" internal 4x 2.5" internal 2x Front connectors USB 3.0 2x USB 2.0 1x Card Reader Microphone 1x Headphones 1x Power supply ATX-PSU Fan mounting option Front 2x 120mm (1x serial, blue LEDs, 3pin-connector) Rear 1x 120mm (blue LEDs, 3pin-connector, serial) Side panel 1x 120mm (optional) Top 2x 120mm (blue LEDs, 3pin-connector, serial) Guarantee / Warranty Warranty 24 months Scope of delivery & Features Scope of delivery
Adapter 4x 3pin to 1x Molex
Side panel with window
Removable dust filters at the bottom
Guide srews for internal mounting of 3.5" HDDs
Serial SD- and Micro-SD - Card Reader
3x 120mm fans with blue LEDs serial in the front, cap and rear
Translucent front panel and top
Separated SSD mounting option at the bottom
PSU mounting at the bottom
Intelligent cable management
Side panels with thumbscrews
USB 3.0, USB 2.0, card reader and Audio plug internal as block connectors
Logistical data Shipping Unit 1 Pcs EU palett 24 Pcs Weight net = 3.90kgs
gross = 4.98kgs
Item number 88881266 EAN-Code 4260455640435
At first attach the special screws at the hard drive.
Make sure, that the screws are attached on the correct side. So right when you look at the hard drive from the side without connections.
Then slide the hard drive with the special screws into the guide rail in the case.
With the side without special screws, the hard drive must lay horizontally on the rail of the opposite side.
Now the hard drive can be pushed smoothly to end of the hdd cage of the case.
Finally, screw the hard disk firmly with two "normal" HDD screws from the side, that faces the rear wall of the case.
No special accessories are available for this product.