K1 - The gaming case with lots of features for a small purse!
The K1 convinces due to its spacious and robust design and has a variety of features. The PSU is mounted at the bottom of the case and is protected by removable dust filters. The serial 120mm fan with red LEDs behind the translucent front panel, the 120mm fan with red LEDs on the top and the further 120mm fan with red LEDs in the rear of the case ensure an optimal cooling of your components.
Another highlight besides the well-thought-out cooling concept of the K1 is the easy and quick installation of all components. Serial guide screws ensure an easy mounting of the internal 3.5" HDDs. Two separated mounting options of 2.5" HDDs complete the variety of the case. Due to the combination of intelligent cable management and space for extension cards with a length of up to 38cm, the K1 becomes a space wonder.
The two USB 3.0- and USB 2.0- connectors, as well as the serial 2in1 Card Reader (for microSD and SD) in the top of the case, offer a fast and easy handling and complete the package.
- translucent parts on front and cap
- Three 120mm fans with red LEDs
- Two USB 3.0 and a USB 2.0 front connectors
- SD- & microSD-Card Reader
Size Form factor ATX, μATX Dimensions (h/w/d) 480 x 210 x 450mm Installation Dimensions Height CPU cooler (max.) 150mm Length graphics card (max.) 380mm Drive Bays 5.25" external 1x 3.5" external 3.5" internal 4x 2.5" internal 2x Front connectors USB 3.0 2x USB 2.0 1x Card Reader Microphone 1x Headphones 1x Power supply ATX-PSU Fan mounting option Front 2x 120mm (1x serial, red LEDs, 3pin-connector) Rear 1x 120mm (red LEDs, 3pin-connector, serial) Side panel 1x 120mm (optional) Top 2x 120mm (red LEDs, 3pin-connector, serial) Guarantee / Warranty Warranty 24 months Scope of delivery & Features Scope of delivery
Adapter 4x 3pin to 1x Molex
Sidepanel with window
Removable dust filters in the bottom
Guide screws for internal mounting of 3.5" HDDs
SD- and microSD-Card Reader
3x Serial 120mm fan with red LEDs in the front, cap and rear
Translucent front panel and cap
Separated SSD mounting option in the bottom
PSU mounting in the bottom
Intelligent cable management
Side panels with thumbscrews
USB 3.0, USB 2.0, Card Reader and Audio plug internal as block connectors
Logistical data Shipping Unit 1 Pcs EU palett 24 Pcs Weight net = 3.94kgs
gross = 5.02kgs
Item number 88881289 EAN-Code 4260455642477
At first attach the special screws at the hard drive.
Make sure, that the screws are attached on the correct side. So right when you look at the hard drive from the side without connections.
Then slide the hard drive with the special screws into the guide rail in the case.
With the side without special screws, the hard drive must lay horizontally on the rail of the opposite side.
Now the hard drive can be pushed smoothly to end of the hdd cage of the case.
Finally, screw the hard disk firmly with two "normal" HDD screws from the side, that faces the rear wall of the case.
No special accessories are available for this product.